Flowline LO101305

Application Offered in liquid and gas sensor types, the general purpose flow switch provides reliable low or no-flow detection of relatively clean, non-coating media with one 1A relay output. Liquid examples include water and acetic acid. Available in Polypropylene-Ryton® and PVDF, the short flow sensor is used in pipe or ducting from 1/2” to 1 1/2”, and the long flow sensor is used in 2” and up. The flow switch set point may be adjusted from 0.04 to 3 fps in liquids, or 1 to 90 fps in gases as a low-flow alarm. The flow sensor is best applied in applications with relatively constant temperature. Specifications Set point range FT10: 0.04 to 3 fps(0.012 to 0.91 mps) GT10: 1 to 90 fps(0.3 to 27 mps) Repeatability: ± 0.5% of set point Response time: 1-10 seconds Set point adjust.: Potentiometer LED indication: Flow status Supply voltage: 14-36 VDC Consumption: 70 mA maximum Contact type: (1) SPST relay Contact rating: 60 VA, 1A maximum Contact output: Selectable NO / NC Process temp.: F: 32° to 140° (C: 0° to 60°) Ambient temp.: F: -40° to 140° (C: -40° to 60°) Pressure: 150 psi (10 bar) @ 25º C, derated @ 1.667 psi(0.113 bar) per ºC above 25º C Sensor rating: NEMA 4X (IP65) Wetted material: -1XX5: PP-Ryton® -5XX5: PVDF Cable jack. mat. -1XX5: Polypropylene -5XX5: PFA Cable type: 4-conductor, shielded Cable length: 10’ (3m) Process mount: 3/4” NPT (3/4” G) Mount. gasket: Viton® Classification: General purpose Compliance: CE Features Rugged Polypropylene-Ryton® or PVDF sensor for corrosive liquids and gases Adjustable set point with LED for flow or no-flow status indication 60VA relay selectable NO or NC via power supply wiring polarity Solid state sensor is not damaged by over-ranging flow velocities
库存 Flowline LO101305信息可联系我们，中国优势供应批发。
LO10-1305可直接发货到广东、江苏、浙江、河南、新疆、山东、陕西及深圳、广州、东莞、北京、上海、天津等省市。