Flowline LU305063S

Application Offered in liquid and gas sensor types, the general purpose flow switch package provides reliable no or low-flow detection of relatively clean non-coating media with a 1A relay output and compact junction box for wiring termination. Liquid examples includes water and acetic acid. Available in PP-Ryton® and PVDF, the short flow sensor is used in pipe or ducting from 1/2” to 1 1/2”, and the long flow sensor is used in 2” and up. The flow switch set point may be adjusted from 0.04 to 3 fps in liquids, or 1 to 90 fps in gases as a low-flow alarm. The flow sensor is best applied in applications with relatively constant temperature. Specifications Set point range AT1X: 0.04 to 3 fps (0.012 to 0.91 mps) AG1X: 1 to 90 fps (0.3 to 27 mps) Repeatability: ±0.5% of set point Response time: 1-10 seconds Set point adjust.: Potentiomete r LED indication: Flow status Supply voltage: 14-36 VDC Consumption: 70 mA maximum Contact type: (1) SPST relay Contact rating: 60 VA, 1A maximum Contact output: Selectable NO / NC Process temp.: F: 32° to 140° (C: 0° to 60°) Ambient temp.: F: -40° to 140° (C: -40° to 60°) Pressure: 150 psi (10 bar) @ 25º C,derated @ 1.667 psi (0.113 bar) per ºC above 25º C Enclosure rating: NEMA 4X (IP65) Enclosure mat.: PP, UL94VO Terminal strip: 6-pole, socket Conduit entrance: 1/2” NPT Wetted material -163X: PP-Ryton® -363X: PVDF Process mount: 3/4” NPT (3/4” G) Mount gasket: Viton® Classification: General purpose Compliance: CE Features Rugged Polypropylene-Ryton® or PVDF sensor for corrosive liquids and gases Adjustable set point with LED forn flow or no-flow status indication Polypropylene enclosure rated NEMA 4X with swivel base and terminal strip 60VA relay selectable NO or NC via power supply wiring polarity Solid state sensor is not damaged by over-ranging flow velocities
库存 Flowline LU305063S信息可联系我们，中国优势供应批发。
LU30-5063S可直接发货到广东、江苏、浙江、河南、新疆、山东、陕西及深圳、广州、东莞、北京、上海、天津等省市。